A directed graph is strongly connected if there is a path between all pairs of vertices. A strongly connected component (**SCC**) of a directed graph is a maximal strongly connected subgraph. For example, there are 3 SCCs in the following graph.

We can find all strongly connected components in O(V+E) time using Kosaraju’s algorithm. Following is detailed Kosaraju’s algorithm.

**1)** Create an empty stack ‘S’ and do DFS traversal of a graph. In DFS traversal, after calling recursive DFS for adjacent vertices of a vertex, push the vertex to stack. In the above graph, if we start DFS from vertex 0, we get vertices in stack as 1, 2, 4, 3, 0.

**2)** Reverse directions of all arcs to obtain the transpose graph.

**3)** One by one pop a vertex from S while S is not empty. Let the popped vertex be ‘v’. Take v as source and do DFS (call DFSUtil(v)). The DFS starting from v prints strongly connected component of v. In the above example, we process vertices in order 0, 3, 4, 2, 1 (One by one popped from stack).

**How does this work?**

The above algorithm is DFS based. It does DFS two times. DFS of a graph produces a single tree if all vertices are reachable from the DFS starting point. Otherwise DFS produces a forest. So DFS of a graph with only one SCC always produces a tree. The important point to note is DFS may produce a tree or a forest when there are more than one SCCs depending upon the chosen starting point. For example, in the above diagram, if we start DFS from vertices 0 or 1 or 2, we get a tree as output. And if we start from 3 or 4, we get a forest. To find and print all SCCs, we would want to start DFS from vertex 4 (which is a sink vertex), then move to 3 which is sink in the remaining set (set excluding 4) and finally any of the remaining vertices (0, 1, 2). So how do we find this sequence of picking vertices as starting points of DFS? Unfortunately, there is no direct way for getting this sequence. However, if we do a DFS of graph and store vertices according to their finish times, we make sure that the finish time of a vertex that connects to other SCCs (other that its own SCC), will always be greater than finish time of vertices in the other SCC (See this for proof). For example, in DFS of above example graph, finish time of 0 is always greater than 3 and 4 (irrespective of the sequence of vertices considered for DFS). And finish time of 3 is always greater than 4. DFS doesn’t guarantee about other vertices, for example finish times of 1 and 2 may be smaller or greater than 3 and 4 depending upon the sequence of vertices considered for DFS. So to use this property, we do DFS traversal of complete graph and push every finished vertex to a stack. In stack, 3 always appears after 4, and 0 appear after both 3 and 4.

In the next step, we reverse the graph. Consider the graph of SCCs. In the reversed graph, the edges that connect two components are reversed. So the SCC {0, 1, 2} becomes sink and the SCC {4} becomes source. As discussed above, in stack, we always have 0 before 3 and 4. So if we do a DFS of the reversed graph using sequence of vertices in stack, we process vertices from sink to source (in reversed graph). That is what we wanted to achieve and that is all needed to print SCCs one by one.

Following is C++ implementation of Kosaraju’s algorithm.

## C++

`// C++ Implementation of Kosaraju's algorithm to print all SCCs ` `#include <iostream> ` `#include <list> ` `#include <stack> ` `using` `namespace` `std; ` ` ` `class` `Graph ` `{ ` ` ` `int` `V; ` `// No. of vertices ` ` ` `list<` `int` `> *adj; ` `// An array of adjacency lists ` ` ` ` ` `// Fills Stack with vertices (in increasing order of finishing ` ` ` `// times). The top element of stack has the maximum finishing ` ` ` `// time ` ` ` `void` `fillOrder(` `int` `v, ` `bool` `visited[], stack<` `int` `> &Stack); ` ` ` ` ` `// A recursive function to print DFS starting from v ` ` ` `void` `DFSUtil(` `int` `v, ` `bool` `visited[]); ` `public` `: ` ` ` `Graph(` `int` `V); ` ` ` `void` `addEdge(` `int` `v, ` `int` `w); ` ` ` ` ` `// The main function that finds and prints strongly connected ` ` ` `// components ` ` ` `void` `printSCCs(); ` ` ` ` ` `// Function that returns reverse (or transpose) of this graph ` ` ` `Graph getTranspose(); ` `}; ` ` ` `Graph::Graph(` `int` `V) ` `{ ` ` ` `this` `->V = V; ` ` ` `adj = ` `new` `list<` `int` `>[V]; ` `} ` ` ` `// A recursive function to print DFS starting from v ` `void` `Graph::DFSUtil(` `int` `v, ` `bool` `visited[]) ` `{ ` ` ` `// Mark the current node as visited and print it ` ` ` `visited[v] = ` `true` `; ` ` ` `cout << v << ` `" "` `; ` ` ` ` ` `// Recur for all the vertices adjacent to this vertex ` ` ` `list<` `int` `>::iterator i; ` ` ` `for` `(i = adj[v].begin(); i != adj[v].end(); ++i) ` ` ` `if` `(!visited[*i]) ` ` ` `DFSUtil(*i, visited); ` `} ` ` ` `Graph Graph::getTranspose() ` `{ ` ` ` `Graph g(V); ` ` ` `for` `(` `int` `v = 0; v < V; v++) ` ` ` `{ ` ` ` `// Recur for all the vertices adjacent to this vertex ` ` ` `list<` `int` `>::iterator i; ` ` ` `for` `(i = adj[v].begin(); i != adj[v].end(); ++i) ` ` ` `{ ` ` ` `g.adj[*i].push_back(v); ` ` ` `} ` ` ` `} ` ` ` `return` `g; ` `} ` ` ` `void` `Graph::addEdge(` `int` `v, ` `int` `w) ` `{ ` ` ` `adj[v].push_back(w); ` `// Add w to v’s list. ` `} ` ` ` `void` `Graph::fillOrder(` `int` `v, ` `bool` `visited[], stack<` `int` `> &Stack) ` `{ ` ` ` `// Mark the current node as visited and print it ` ` ` `visited[v] = ` `true` `; ` ` ` ` ` `// Recur for all the vertices adjacent to this vertex ` ` ` `list<` `int` `>::iterator i; ` ` ` `for` `(i = adj[v].begin(); i != adj[v].end(); ++i) ` ` ` `if` `(!visited[*i]) ` ` ` `fillOrder(*i, visited, Stack); ` ` ` ` ` `// All vertices reachable from v are processed by now, push v ` ` ` `Stack.push(v); ` `} ` ` ` `// The main function that finds and prints all strongly connected ` `// components ` `void` `Graph::printSCCs() ` `{ ` ` ` `stack<` `int` `> Stack; ` ` ` ` ` `// Mark all the vertices as not visited (For first DFS) ` ` ` `bool` `*visited = ` `new` `bool` `[V]; ` ` ` `for` `(` `int` `i = 0; i < V; i++) ` ` ` `visited[i] = ` `false` `; ` ` ` ` ` `// Fill vertices in stack according to their finishing times ` ` ` `for` `(` `int` `i = 0; i < V; i++) ` ` ` `if` `(visited[i] == ` `false` `) ` ` ` `fillOrder(i, visited, Stack); ` ` ` ` ` `// Create a reversed graph ` ` ` `Graph gr = getTranspose(); ` ` ` ` ` `// Mark all the vertices as not visited (For second DFS) ` ` ` `for` `(` `int` `i = 0; i < V; i++) ` ` ` `visited[i] = ` `false` `; ` ` ` ` ` `// Now process all vertices in order defined by Stack ` ` ` `while` `(Stack.empty() == ` `false` `) ` ` ` `{ ` ` ` `// Pop a vertex from stack ` ` ` `int` `v = Stack.top(); ` ` ` `Stack.pop(); ` ` ` ` ` `// Print Strongly connected component of the popped vertex ` ` ` `if` `(visited[v] == ` `false` `) ` ` ` `{ ` ` ` `gr.DFSUtil(v, visited); ` ` ` `cout << endl; ` ` ` `} ` ` ` `} ` `} ` ` ` `// Driver program to test above functions ` `int` `main() ` `{ ` ` ` `// Create a graph given in the above diagram ` ` ` `Graph g(5); ` ` ` `g.addEdge(1, 0); ` ` ` `g.addEdge(0, 2); ` ` ` `g.addEdge(2, 1); ` ` ` `g.addEdge(0, 3); ` ` ` `g.addEdge(3, 4); ` ` ` ` ` `cout << ` `"Following are strongly connected components in "` ` ` ```
"given graph
"
``` `; ` ` ` `g.printSCCs(); ` ` ` ` ` `return` `0; ` `} ` |

## Java

`// Java implementation of Kosaraju's algorithm to print all SCCs ` `import` `java.io.*; ` `import` `java.util.*; ` `import` `java.util.LinkedList; ` ` ` `// This class represents a directed graph using adjacency list ` `// representation ` `class` `Graph ` `{ ` ` ` `private` `int` `V; ` `// No. of vertices ` ` ` `private` `LinkedList<Integer> adj[]; ` `//Adjacency List ` ` ` ` ` `//Constructor ` ` ` `Graph(` `int` `v) ` ` ` `{ ` ` ` `V = v; ` ` ` `adj = ` `new` `LinkedList[v]; ` ` ` `for` `(` `int` `i=` `0` `; i<v; ++i) ` ` ` `adj[i] = ` `new` `LinkedList(); ` ` ` `} ` ` ` ` ` `//Function to add an edge into the graph ` ` ` `void` `addEdge(` `int` `v, ` `int` `w) { adj[v].add(w); } ` ` ` ` ` `// A recursive function to print DFS starting from v ` ` ` `void` `DFSUtil(` `int` `v,` `boolean` `visited[]) ` ` ` `{ ` ` ` `// Mark the current node as visited and print it ` ` ` `visited[v] = ` `true` `; ` ` ` `System.out.print(v + ` `" "` `); ` ` ` ` ` `int` `n; ` ` ` ` ` `// Recur for all the vertices adjacent to this vertex ` ` ` `Iterator<Integer> i =adj[v].iterator(); ` ` ` `while` `(i.hasNext()) ` ` ` `{ ` ` ` `n = i.next(); ` ` ` `if` `(!visited[n]) ` ` ` `DFSUtil(n,visited); ` ` ` `} ` ` ` `} ` ` ` ` ` `// Function that returns reverse (or transpose) of this graph ` ` ` `Graph getTranspose() ` ` ` `{ ` ` ` `Graph g = ` `new` `Graph(V); ` ` ` `for` `(` `int` `v = ` `0` `; v < V; v++) ` ` ` `{ ` ` ` `// Recur for all the vertices adjacent to this vertex ` ` ` `Iterator<Integer> i =adj[v].listIterator(); ` ` ` `while` `(i.hasNext()) ` ` ` `g.adj[i.next()].add(v); ` ` ` `} ` ` ` `return` `g; ` ` ` `} ` ` ` ` ` `void` `fillOrder(` `int` `v, ` `boolean` `visited[], Stack stack) ` ` ` `{ ` ` ` `// Mark the current node as visited and print it ` ` ` `visited[v] = ` `true` `; ` ` ` ` ` `// Recur for all the vertices adjacent to this vertex ` ` ` `Iterator<Integer> i = adj[v].iterator(); ` ` ` `while` `(i.hasNext()) ` ` ` `{ ` ` ` `int` `n = i.next(); ` ` ` `if` `(!visited[n]) ` ` ` `fillOrder(n, visited, stack); ` ` ` `} ` ` ` ` ` `// All vertices reachable from v are processed by now, ` ` ` `// push v to Stack ` ` ` `stack.push(` `new` `Integer(v)); ` ` ` `} ` ` ` ` ` `// The main function that finds and prints all strongly ` ` ` `// connected components ` ` ` `void` `printSCCs() ` ` ` `{ ` ` ` `Stack stack = ` `new` `Stack(); ` ` ` ` ` `// Mark all the vertices as not visited (For first DFS) ` ` ` `boolean` `visited[] = ` `new` `boolean` `[V]; ` ` ` `for` `(` `int` `i = ` `0` `; i < V; i++) ` ` ` `visited[i] = ` `false` `; ` ` ` ` ` `// Fill vertices in stack according to their finishing ` ` ` `// times ` ` ` `for` `(` `int` `i = ` `0` `; i < V; i++) ` ` ` `if` `(visited[i] == ` `false` `) ` ` ` `fillOrder(i, visited, stack); ` ` ` ` ` `// Create a reversed graph ` ` ` `Graph gr = getTranspose(); ` ` ` ` ` `// Mark all the vertices as not visited (For second DFS) ` ` ` `for` `(` `int` `i = ` `0` `; i < V; i++) ` ` ` `visited[i] = ` `false` `; ` ` ` ` ` `// Now process all vertices in order defined by Stack ` ` ` `while` `(stack.empty() == ` `false` `) ` ` ` `{ ` ` ` `// Pop a vertex from stack ` ` ` `int` `v = (` `int` `)stack.pop(); ` ` ` ` ` `// Print Strongly connected component of the popped vertex ` ` ` `if` `(visited[v] == ` `false` `) ` ` ` `{ ` ` ` `gr.DFSUtil(v, visited); ` ` ` `System.out.println(); ` ` ` `} ` ` ` `} ` ` ` `} ` ` ` ` ` `// Driver method ` ` ` `public` `static` `void` `main(String args[]) ` ` ` `{ ` ` ` `// Create a graph given in the above diagram ` ` ` `Graph g = ` `new` `Graph(` `5` `); ` ` ` `g.addEdge(` `1` `, ` `0` `); ` ` ` `g.addEdge(` `0` `, ` `2` `); ` ` ` `g.addEdge(` `2` `, ` `1` `); ` ` ` `g.addEdge(` `0` `, ` `3` `); ` ` ` `g.addEdge(` `3` `, ` `4` `); ` ` ` ` ` `System.out.println(` `"Following are strongly connected components "` `+ ` ` ` `"in given graph "` `); ` ` ` `g.printSCCs(); ` ` ` `} ` `} ` `// This code is contributed by Aakash Hasija ` |

## Python

`# Python implementation of Kosaraju's algorithm to print all SCCs ` ` ` `from` `collections ` `import` `defaultdict ` ` ` `#This class represents a directed graph using adjacency list representation ` `class` `Graph: ` ` ` ` ` `def` `__init__(` `self` `,vertices): ` ` ` `self` `.V` `=` `vertices ` `#No. of vertices ` ` ` `self` `.graph ` `=` `defaultdict(` `list` `) ` `# default dictionary to store graph ` ` ` ` ` `# function to add an edge to graph ` ` ` `def` `addEdge(` `self` `,u,v): ` ` ` `self` `.graph[u].append(v) ` ` ` ` ` `# A function used by DFS ` ` ` `def` `DFSUtil(` `self` `,v,visited): ` ` ` `# Mark the current node as visited and print it ` ` ` `visited[v]` `=` `True` ` ` `print` `v, ` ` ` `#Recur for all the vertices adjacent to this vertex ` ` ` `for` `i ` `in` `self` `.graph[v]: ` ` ` `if` `visited[i]` `=` `=` `False` `: ` ` ` `self` `.DFSUtil(i,visited) ` ` ` ` ` ` ` `def` `fillOrder(` `self` `,v,visited, stack): ` ` ` `# Mark the current node as visited ` ` ` `visited[v]` `=` `True` ` ` `#Recur for all the vertices adjacent to this vertex ` ` ` `for` `i ` `in` `self` `.graph[v]: ` ` ` `if` `visited[i]` `=` `=` `False` `: ` ` ` `self` `.fillOrder(i, visited, stack) ` ` ` `stack ` `=` `stack.append(v) ` ` ` ` ` ` ` `# Function that returns reverse (or transpose) of this graph ` ` ` `def` `getTranspose(` `self` `): ` ` ` `g ` `=` `Graph(` `self` `.V) ` ` ` ` ` `# Recur for all the vertices adjacent to this vertex ` ` ` `for` `i ` `in` `self` `.graph: ` ` ` `for` `j ` `in` `self` `.graph[i]: ` ` ` `g.addEdge(j,i) ` ` ` `return` `g ` ` ` ` ` ` ` ` ` `# The main function that finds and prints all strongly ` ` ` `# connected components ` ` ` `def` `printSCCs(` `self` `): ` ` ` ` ` `stack ` `=` `[] ` ` ` `# Mark all the vertices as not visited (For first DFS) ` ` ` `visited ` `=` `[` `False` `]` `*` `(` `self` `.V) ` ` ` `# Fill vertices in stack according to their finishing ` ` ` `# times ` ` ` `for` `i ` `in` `range` `(` `self` `.V): ` ` ` `if` `visited[i]` `=` `=` `False` `: ` ` ` `self` `.fillOrder(i, visited, stack) ` ` ` ` ` `# Create a reversed graph ` ` ` `gr ` `=` `self` `.getTranspose() ` ` ` ` ` `# Mark all the vertices as not visited (For second DFS) ` ` ` `visited ` `=` `[` `False` `]` `*` `(` `self` `.V) ` ` ` ` ` `# Now process all vertices in order defined by Stack ` ` ` `while` `stack: ` ` ` `i ` `=` `stack.pop() ` ` ` `if` `visited[i]` `=` `=` `False` `: ` ` ` `gr.DFSUtil(i, visited) ` ` ` `print` `"" ` ` ` `# Create a graph given in the above diagram ` `g ` `=` `Graph(` `5` `) ` `g.addEdge(` `1` `, ` `0` `) ` `g.addEdge(` `0` `, ` `2` `) ` `g.addEdge(` `2` `, ` `1` `) ` `g.addEdge(` `0` `, ` `3` `) ` `g.addEdge(` `3` `, ` `4` `) ` ` ` ` ` `print` `(` `"Following are strongly connected components "` `+` ` ` `"in given graph"` `) ` `g.printSCCs() ` `#This code is contributed by Neelam Yadav ` |

Output:

Following are strongly connected components in given graph 0 1 2 3 4

**Time Complexity: ** The above algorithm calls DFS, fins reverse of the graph and again calls DFS. DFS takes O(V+E) for a graph represented using adjacency list. Reversing a graph also takes O(V+E) time. For reversing the graph, we simple traverse all adjacency lists.

The above algorithm is asymptotically best algorithm, but there are other algorithms like Tarjan’s algorithm and path-based which have same time complexity but find SCCs using single DFS. The Tarjan’s algorithm is discussed in the following post.

Tarjan’s Algorithm to find Strongly Connected Components

**Applications:**

SCC algorithms can be used as a first step in many graph algorithms that work only on strongly connected graph.

In social networks, a group of people are generally strongly connected (For example, students of a class or any other common place). Many people in these groups generally like some common pages or play common games. The SCC algorithms can be used to find such groups and suggest the commonly liked pages or games to the people in the group who have not yet liked commonly liked a page or played a game.

**References:**

http://en.wikipedia.org/wiki/Kosaraju%27s_algorithm

https://www.youtube.com/watch?v=PZQ0Pdk15RA

You may also like to see Tarjan’s Algorithm to find Strongly Connected Components.

Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above

## leave a comment

## 0 Comments