Tutorialspoint.dev

8085 program to multiply two 8 bit numbers using logical instructions

Prerequisite – Logical instructions in 8085 microprocessor
Problem – Write a assembly language program multiply two 8 bit numbers and store the result at memory address 3050 in 8085 microprocessor.

Example –

The value of accumulator(A) after using RLC instruction is:

A = 2n*A

Where n = number of times RLC instruction is used.



Assumptions –
Assume that the first number is stored at register B, and second number is stored at register C. And the result must not have any carry.

Algorithm –

  1. Assign the value 05 to register B
  2. Assign the value 04 to register C
  3. Move the content of B in A
  4. Rotate accumulator left without carry
  5. Rotate accumulator left without carry
  6. Store the content of accumulator at memory address 3050
  7. Halt of the program

Program –

MEMORY ADDRESS MNEMONICS COMMENTS
2000 MVI B 05 B <- 05
2002 MVI C 04 C <- 04
2004 MOV A, B A <- B
2005 RLC rotate the content of A without carry
2006 RLC rotate the content of A without carry
2007 STA 3050 3050 <- A
200A HLT End of the program

Explanation –

  1. MVI B 05: assign the value 05 to B register.
  2. MVI C 04: assign the value 04 to C register.
  3. MOV A, B: move the content of register B to register A.
  4. RLC: rotate the content of accumulator left without carry.
  5. RLC: rotate the content of accumulator left without carry.
  6. STA 3050: store the content of register A at memory location 3050
  7. HLT: stops the execution of the program.


This article is attributed to GeeksforGeeks.org

leave a comment

code

0 Comments

load comments

Subscribe to Our Newsletter