We’ve been studying a lot about the Wired Network. Ethernet is the most common example. Wired networks differ from wireless which uses radio waves rather than transmitting electrical signals over the cables.
Wi-Fi stands for Wireless Fidelity. It is a technology for wireless local area networking with devices based on IEEE 802.11 standards.
Wi-Fi compatible devices can connect to the internet via WLAN network and a wireless access point abbreviated as AP. Every WLAN has an access point which is responsible for receiving and transmitting data from/to users.
IEEE has defined certain specifications for wireless LAN, called IEEE 802.11 which covers physical and data link layers.
Note:Access Point(AP) is a wireless LAN base station that can connect one or many wireless devices simultaneously to internet.
The architecture of this standard has 2 kinds of services:
1. BSS (Basic Service Set)
2. ESS (Extended Service Set)
BSS is the basic building block of WLAN. It is made of wireless mobile stations and an optional central base station called Access Point.
Stations can form a network without an AP and can agree to be a part of a BSS.
A BSS without an AP cannot send data to other BSSs and defines a standalone network. It is called Ad-hoc network or Independent BSS(IBSS).i.e A BSS without AP is an ad-hoc network.
A BSS with AP is infrastructure network.
The figure below depicts an IBSS, BSS with the green coloured box depicting an AP.
ESS is made up of 2 or more BSSs with APs. BSSs are connected to the distribution system via their APs. The distribution system can be any IEEE LAN such as Ethernet.
ESS has 2 kinds of stations:
1. Mobile – stations inside the BSS
2. Stationary – AP stations that are part of wired LAN.
The topmost green box represents the distribution system and the other 2 green boxes represent the APs of 2 BSSs.